Ford Truck Club Forum

Ford Truck Club Forum (
-   1992-1996 Ford F150
-   -   93 F150 performance parts question (

darylkey November 15th, 2018 02:52 PM

93 F150 performance parts question
Hello, thanks for letting me join.
Iíve owned mustangs for 26 years, mosty fox bodies.
With that said Iíve acquired several good parts that should fit the F150.
Iím trying to figure out which intake I should go with or have to use.
Parts I have are Trick Flow heads, Comp rockers. Still have to get a cam.
Iíve got several nice Mustang style intakes, injectors, etc..
With these trucks being speed density, what issues will I run into?

I barely have service today, and didnít have time to search, if itís already been asked.
Thank You.
1993 F-150 XLT
5 speed
Only change so far is exhaust.

harrison28 November 15th, 2018 04:17 PM

If money isn't a problem, this is what I would put on it.......

glc November 15th, 2018 05:54 PM

Remember, trucks need to be tuned differently than Mustangs. They are heavier, and need to be tuned for torque and not high end HP.

Also note that the 5 speed manual is a light duty Mazda box and can't handle much more power than the stock engine.

darylkey November 15th, 2018 07:07 PM

My goal would be sound and better performance without ripping gears.
I’ll check out that link.

darylkey November 15th, 2018 10:10 PM

What trans is in these 5 speeds?

glc November 15th, 2018 11:33 PM

Mazda M5OD-R2.

Weak area is the input shaft bearings.

bronco40 December 16th, 2018 10:35 AM

I`m going comp cam #249-35-512-8....Rusty Bell matched it @Jegs....for my 5.0l roller .

bronco40 December 16th, 2018 10:37 AM

wanna sell a good lower intake?

harrison28 December 17th, 2018 10:02 AM

Wish I could help bro. All I have laying around is a couple of stock cast intakes.

All times are GMT -4. The time now is 04:50 PM. is not authorized, endorsed or affiliated with the Ford Motor Company
or any of their subsidiaries. Fordģ is a registered trademark of the Ford Motor Company

Powered by vBulletin® Version 3.8.6 Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.