Quantcast Ford Truck Club Forum - View Single Post - help with a GM hei on 351w
View Single Post
Old January 1st, 2016, 02:40 PM
JSoko's Avatar
JSoko JSoko is offline


Join Date: Jun 2009
Location: Northwest Georgia
Posts: 15,076
Likes : 36
Liked 188 Times in 170 Posts

try this if it's got a rotor
if your sure the dist. is in correct
bring #1 up to TDC on compression (both valves closed)
rotor is now pointing to the #1 position on dist.

according to the dist. above my #1 is at the #2 position

For Those Who Fought For It...
Freedom Has A Taste The Protected Will Never Know.

Last edited by JSoko; January 1st, 2016 at 02:43 PM.