Quantcast Ford Truck Club Forum - View Single Post - my 6.0L thread...
View Single Post
  #8  
Old February 19th, 2013, 03:07 PM
ASwaff400's Avatar
ASwaff400 ASwaff400 is offline
 

Join Date: Nov 2009
Location: St. Pete FL
Posts: 1,890
Likes : 4
Liked 17 Times in 14 Posts
Default

dropped the truck off this morning to have the work done, so far the list is:
coolant flush
change oil cooler
weld the egr cooler shut
pull turbo, clean all components
replace the boots(maybe i forget)
change t-stat
install coolant filter
refill coolant with CAT EC-1 coolant
change serpentine belt
refill oil with full synthetic plus a bottle of rev-x

he's gonna let me know if anything else needs attention or replacing when he digs into it

i also asked him to take pics of the process so i can post the pics and info, he said he had no problem doing this...

also once i get the truck back she's getting new batteries. and MAYBE 2.5 inch level kit and f350 rear blocks(4inch)

Aaron

'95 F150 XLT, reg cab long bed, swapped 351w,
4.56 gears, 4-link SAS, 14" coil overs.

SAS Thread!!!

'04 F250 Lariat, crew cab short bed 4x4 6.0L PSD, 3.73 gears, straight piped,
sinister coolant filter, welded egr, CAT EC-1 coolant, blue spring.
60 gallon fuel tank/tool box, SCT X4 w/IDP custom tunes, SOON TO BE STUDDED!!



a bunch of boats







Last edited by ASwaff400; February 19th, 2013 at 03:20 PM.