Quantcast Ford Truck Club Forum - View Single Post - 1994 ranger no start
View Single Post
  #3  
Old December 9th, 2012, 03:20 PM
popee's Avatar
popee popee is offline
 

Join Date: Dec 2012
Posts: 3
Likes : 0
Liked 0 Times in 0 Posts
Default

thanks for your input I need to see a drawing showing the wiring of the starting circuit because I just jumpered 12v to the small wire on the starter while truck was in neutral and it started right up solenoid on starter picked and that is why it started sooo I would like to see routing of wires from ignition switch start position all the way to the starter solenoid that is on the starter by the way the iginition switch was in the on position when it started and I was able to turn it off with ign switch ty