Quantcast Ford Truck Club Forum - View Single Post - 1995 F150 Rotor and Pad Swap
View Single Post
  #7  
Old May 18th, 2017, 08:28 PM
GrMustFb's Avatar
GrMustFb GrMustFb is offline
 

Join Date: May 2017
Posts: 2
Likes : 0
Liked 0 Times in 0 Posts
Default 1995 F150 Rotor and Pad Swap

Great job on this procedure. I just finished my 1996 F150 4x4 with automatic hubs. My question is you state that after removing the "C" clip there are three other shims that are under it. There is also a photo that shows them stacked. My problem is during assembly, after the 3 shims are in, there is not enough space left for the thickness of the "C" clip. I stacked them as I removed them, the same as you. I ended up putting the two shims in first then the "C" and then put the spline one top of this clip. Many thanks , I did not put the large ring back on yet waiting for a clarification.