|
Welcome to FordTruckClub.net
|
Welcome to FordTruckClub.net, the internet's premier Ford truck community! You are currently viewing our boards as a guest which gives you limited access to view discussions and access other forum features. By joining our free online community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple, and absolutely free so please, join our community today!
Forgot your password? click here.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|

December 9th, 2012, 06:59 AM
|
 |
|
|
Join Date: Dec 2012
Posts: 3
Likes : 0
Liked 0 Times in 0 Posts
|
|
1994 ranger no start
hi all
I have 1994 ranger 2.3 2wd I need wiring diagram or at least
the starting circuit the truck will not start without help the on fender solenoid lclicks when clutch pedal is depressed thanks in advance for any help pm me with a diagram or link or post on here
|
|
|
|

December 9th, 2012, 09:17 AM
|
 |
|
|
Join Date: Oct 2011
Location: Joplin, MO
Posts: 2,093
Likes : 44
Liked 36 Times in 30 Posts
|
|
It's either the neutral safety switch or the fender solenoid.
|
|
1994 F150 XLT ExCab SB 306, 4R70w, 8.8 3.55 open, MSD StreetFire coil, Taylor Siro Pro wires, MSD cap and rotor, 1.72 Roller Rockers, 2º cam advance w/ Cloyes Street True Roller timing set, Flat top Hyperutectic pistons, Flowtech Long Tube headers, Xpipe, High flow Magnaflow converters, Spintech XL Sportsman DIDO muffler.
|

December 9th, 2012, 03:20 PM
|
 |
|
|
Join Date: Dec 2012
Posts: 3
Likes : 0
Liked 0 Times in 0 Posts
|
|
thanks for your input I need to see a drawing showing the wiring of the starting circuit because I just jumpered 12v to the small wire on the starter while truck was in neutral and it started right up solenoid on starter picked and that is why it started sooo I would like to see routing of wires from ignition switch start position all the way to the starter solenoid that is on the starter by the way the iginition switch was in the on position when it started and I was able to turn it off with ign switch ty
|
|
|

December 9th, 2012, 03:33 PM
|
 |
|
|
Join Date: Dec 2012
Posts: 3
Likes : 0
Liked 0 Times in 0 Posts
|
|
hi again can any one help me with a drawing for start/ign wiring or a link you can pm me or send me an email if this wiring diag is available on this site could you please tell me how to search for it because I have not found it as always thanks for any help ty
|
|
|

December 9th, 2012, 04:54 PM
|
 |
|
|
Join Date: Oct 2011
Location: Joplin, MO
Posts: 2,093
Likes : 44
Liked 36 Times in 30 Posts
|
|
I think this is what you're looking for.

FWIW, your issue sounds like the solenoid is bad. The good news is they aren't expensive and easy to replace. Good luck and to FTC!!!
|
|
1994 F150 XLT ExCab SB 306, 4R70w, 8.8 3.55 open, MSD StreetFire coil, Taylor Siro Pro wires, MSD cap and rotor, 1.72 Roller Rockers, 2º cam advance w/ Cloyes Street True Roller timing set, Flat top Hyperutectic pistons, Flowtech Long Tube headers, Xpipe, High flow Magnaflow converters, Spintech XL Sportsman DIDO muffler.
|

March 31st, 2013, 02:37 PM
|
 |
|
|
Join Date: Dec 2012
Posts: 2
Likes : 0
Liked 0 Times in 0 Posts
|
|
Any day above ground is a good day. Happy Easter.
|
|
|

March 31st, 2013, 05:07 PM
|
 |
|
|
Join Date: Jun 2009
Location: Northwest Georgia
Posts: 15,012
Likes : 34
Liked 187 Times in 169 Posts
|
|
looking at he diagram and following the wires , it could be 4 things
|
|
For Those Who Fought For It...
Freedom Has A Taste The Protected Will Never Know.
 
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
(View-All)
Members who have read this thread : 11
|
1994-f150-bud
,
ASwaff400
,
bikertrash3531
,
Booba5185
,
catmechanic07
,
glc
,
JSoko
,
popee
,
rfraze
,
Russo2
,
Tomsranger
|
|
 |