Quantcast Ford, Explorer, Brakes - Ford Truck Club Forum




Home






Forum






Gallery






Garage






Blog






Arcade






Settings






New Posts






TOTM






Vote




Remember Me?
       Join for free!




Search






How-To's






Unanswered






FTC Toolbar






Social Sites






Register




 
Ford Truck Club Forum > ALL OTHER FORD MODELS > Ford Explorer



Welcome to FordTruckClub.net
Welcome to FordTruckClub.net, the internet's premier Ford truck community! You are currently viewing our boards as a guest which gives you limited access to view discussions and access other forum features. By joining our free online community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple, and absolutely free so please, join our community today!

Forgot your password? click here.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

 
Thread Tools Display Modes
  #1  
Old August 21st, 2012, 12:09 AM
gtxmn1214's Avatar
gtxmn1214 gtxmn1214 is offline
 

Join Date: Aug 2012
Posts: 2
Likes : 0
Liked 1 Time in 1 Post
Default Ford, Explorer, Brakes

I need some info on bleeding the brakes on a 2006 ford explorer.i have been told that the engine should not be running when bleeding is this correct?
I am doing this because the brake pedal if not pushed for appx.3-4 minutes the pedal will go almost to the floor but still has stopping power and when i let off and hit the pedal again i have a full brake pedal so any suggestions on what else could be going on with the brakes.this vehicle has 92k plus miles bought new by myself and no issues at all until this has always been serviced regularly on time.
All help appreciated. Thanks arnett
The Following User Likes This Post:
Redwardsray (November 29th, 2018)
  #2  
Old August 21st, 2012, 10:11 AM
DoubleDee's Avatar
DoubleDee DoubleDee is offline
 

Join Date: Jun 2009
Location: Kyle, TX
Posts: 1,711
Images: 669
Likes : 28
Liked 5 Times in 5 Posts
Default

You're correct about the engine not running when bleeding.

That whole brake pedal to the floor and all, I have no idea.

Double(. Y .)Dee
SSG, TXARNG
OIF III ('05) & OIF VIII ('10)
Least knowledgeable when it comes to the whirly, spinny things.


How To Use The FTC Gallery
Check out the Truck of the Month forum and vote!
2004-2008 F-150 Specific How To's:
VIN Decoder
Gotts Mod - 4.6L (5.4L similar)
Big 3 Upgrade
Seat Removal
Interior Door Disassembly SCrew (RCab/SCab similar)
Interior Trim/Carpet Removal


"Fighting is not handing out cookies, it's gunfire and rockets, and there will be casualties." - Haji Khalifa Mohammad Shah
  #3  
Old August 21st, 2012, 11:58 AM
Booba5185's Avatar
Booba5185 Booba5185 is offline
 

Join Date: Dec 2011
Location: Ava, MO
Posts: 2,705
Images: 747
Likes : 13
Liked 31 Times in 28 Posts
Default

It's possible that it needs to bled, so I'd start there, but it could also be the master cylinder too.

You'll need a helper to bleed the brakes. Have the helper pump the brakes 3 or 4 times and hold pressure on the brake pedal, then loosen the bleeding screw on the drum\disk brakes until either the air comes out of the pedal hit the ground. If the pedal hits the ground, tighten the bleeding screw and have the helper pump the brakes again. If the air comes out (it will almost spit at you so be ready) tighten the bleeding screw and move on to the next tire. Do this for all 4 tires, starting at the tire that is farthest away from the mast cylinder and work your way back. This means bleed the back passsnger, then the back driver, then the front passenger, then the front driver.

Good luck.


89 F-150 5.0l AOD 2x4, 3.55 LS(+4), Converted to HO Roller, 3g Alt, GT40Ps, Y-pipe, Rerouted PCV, Dual Taurus E-fans, Explorer Injectors, Remote ICM, DIY Cold air, Rubber Vacuum System, Tranny cooler, Remote Tranny filter, Saginaw P\S swap, F350 Brakes, more.


  #4  
Old August 21st, 2012, 01:54 PM
Klitch's Avatar
Klitch Klitch is offline
 

Join Date: Nov 2009
Location: Benton City, WA
Posts: 1,602
Images: 599
Likes : 3
Liked 5 Times in 5 Posts
Default

Also check for defective lines!

built and blueprinted Lightning powerplant with p&p heads, race built 4r70w by Darrin @ BC-Automotive
1-Ton swap Dyno 436/475
Transmission saga. avoid www.Engineworldusa.com, junk import motors.





  #5  
Old August 21st, 2012, 02:37 PM
JSoko's Avatar
JSoko JSoko is offline

 

Join Date: Jun 2009
Location: Northwest Georgia
Posts: 14,952
Images: 624
Likes : 32
Liked 182 Times in 164 Posts
Default

check these out I found on the site useing SEARCH, click on the safe links below

http://www.fordtruckclub.net/forum/s...t=bleed+brakes

2 good links in this one s post #2 http://www.fordtruckclub.net/forum/s...t=bleed+brakes

http://www.fordtruckclub.net/forum/s...t=bleed+brakes


For Those Who Fought For It...
Freedom Has A Taste The Protected Will Never Know.












  #6  
Old August 23rd, 2012, 12:01 AM
gtxmn1214's Avatar
gtxmn1214 gtxmn1214 is offline
 

Join Date: Aug 2012
Posts: 2
Likes : 0
Liked 1 Time in 1 Post
Smile 2006 Ford Explorer brake problem

Hello,
i would like to thank all for the reply to my post regarding my
2006 explorer brake issue.
I will try these steps tomorrow and let you all know how it turns out.
Thanks again
gtxmn1214


Thread Tools
Display Modes


(View-All Members who have read this thread : 10
BigBlue79 , Booba5185 , craftyken , DoubleDee , gtxmn1214 , JSoko , Klitch , Red91 , Redwardsray , Top Cat

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford Releases Pricing on All-New Ford Explorer, Base Starts at $28,995 Bates88 Garage Talk: General Tech Talk 0 July 28th, 2010 05:45 PM
With Explorer, Ford hopes to redefine SUV BigT67 General Discussion
0 July 26th, 2010 09:27 PM
Ford Teases 2011 Explorer Bates88 Garage Talk: General Tech Talk 0 June 11th, 2010 04:53 PM
Ford Plans Police-Spec SUV Based on New Explorer Bates88 Garage Talk: General Tech Talk 0 May 26th, 2010 01:44 PM
1999 Ford Explorer Sport 2dr For SALE RedHot150 Vehicles For Sale
4 March 4th, 2010 03:39 PM

Tags
brakes , explorer , ford

Forum Jump









FordTruckClub.net is not authorized, endorsed or affiliated with the Ford Motor Company
or any of their subsidiaries. Ford® is a registered trademark of the Ford Motor Company


Powered by vBulletin® Version 3.8.6 Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.